Tag Archives: tractor clutch

China Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft with Good quality

Merchandise Description

   wide angle pto shafts cardan tractor tractor travel nylon sheets handbook driven clutch                         friction telescopic tube gearbox for tiller agricultural pto shaft 

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft     with Good quality China Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft     with Good quality
editor by czh 2023-01-21

China CE Approved, Hot Sale Multifunctional 12HP 15HP 18HP 20HP Belt Drive Small/Mini Farm Tractor slip clutch pto shaft

Solution Description

Work on the site in a modern way – employing a mini-tractor

LANGPAK T-200 is a mini-tractor with a 3-stage hitch and energy consider-off shaft of 540 rpm.

 

 

 

What duties does the mini-tractor LANGPAK T-two hundred fix?

* Plowing land, in distinct virgin lands, using a double-hull plow.
* Cultivation and tillage by a rotary cutter, which is connected to the PTO.
* Mowing grass with a rear rotor or section mowing machine and haymaking with a baler.
* Planting tuberous greens with planting devices and sowing crops with a seeder.
* PlHangZhou and construction performs utilizing a municipal dump.

Comprehensive Pictures

 

 

Rewards of the mini-tractor LANGPAK T-two hundred

* The mini-tractor is designed for the European industry, has efficiently handed laboratory exams and certification in the European Union. The tractor is utilized by European and Russian farmers.

* The tractor is based mostly on a body skeleton, with a a few-level attachment technique and a energy just take-off shaft of 540 rpm.

* The monitor of the mini-tractor is adjustable in the assortment from a hundred and ten to a hundred forty five cm. Adjustment is needed for agricultural tasks in compliance with row spacing. A gauge of 145 cm gives the tractor steadiness when using an excavator.

* A six-velocity gearbox with reverse equipment and reverse equipment was created for tractors weighing over 1 ton. The gearbox can face up to the intense masses that a 20-liter one-cylinder diesel motor produces. with.

Specialized characteristics of the mini-tractor LANGPAK T-two hundred

* Non-autonomous six-phase electrical power take-off shaft Ø35 with rectangular splines, 540 rpm.
* Gearbox (6 + 2) with a planetary differential and a a few-point suspension with a carrying ability of up to 360 kg.
* Huge rear wheels – 9.5 “-sixteen”. Appropriate tractor bodyweight distribution and dependable traction.
* The package contains weighting ballasts, which improve the performance of the tractor by fourteen%, and hook energy by forty eight%. The need for weighting was discovered in laboratory tests of the tractor.
* The tractor has entrance wheels with a longitudinal tread, which improve performance by 7% greater than similar wheels with a chevron tread.

 

Product Parameters

 

 

Items Description
Model Model T-180
Power & Variety 18HP, 4×2
Engine Product ZS1105
Bore×Stroke(mm) a hundred and five
Cooling Program Drinking water-Cooled, Four Strokes,Immediate in Injection
Starting up Technique Electrical Starting
Dimension Dimensions L*W*H (mm) 2400×1310×1750
Wheel Base (mm) 1100~1300
Wheel Tread (mm)  F/R 1100~1300/1100~1300
Min Floor Clearance(mm) 270
Structure Excess weight(kg) 750
Transmission Sort Sliding
No. of Gear 3×2F + 1R
Dimension of belts B2150×3
Clutch Kind Dry, Double Discs,
Generally Jointing and Fricting Variety
Running
Method
Tyre F/R 6.00-twelve/7.50-twenty
Steering Mechanical Steering
Brake Toe Variety Brake
Sensors On The Dashboard H2o Temperature Gauge,
Oil Force Gauge
Ammeter Electrical, Hour Meter Electrical
Working
Program
Hitch Method 3-Stage hydraulic hitch
PTO Rear Rectangle Spline, 6 Enamel
PTO Velocity 540rpm

 

 

After-sales Service: 1 Year
Warranty: 1 Year
Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor
Certification: ISO, CE
Drive Wheel: 2WD

###

Customization:

###

Items Description
Model MODEL T-180
Power & Type 18HP, 4×2
Engine Model ZS1105
Bore×Stroke(mm) 105
Cooling System Water-Cooled, Four Strokes,Direct in Injection
Starting System Electrical Starting
Dimension Size L*W*H (mm) 2400×1310×1750
Wheel Base (mm) 1100~1300
Wheel Tread (mm)  F/R 1100~1300/1100~1300
Min Ground Clearance(mm) 270
Structure Weight(kg) 750
Transmission Type Sliding
No. of Gear 3×2F + 1R
Size of belts B2150×3
Clutch Type Dry, Double Discs,
Normally Jointing and Fricting Type
Running
System
Tyre F/R 6.00-12/7.50-20
Steering Mechanical Steering
Brake Toe Type Brake
Sensors On The Dashboard Water Temperature Gauge,
Oil Pressure Gauge
Ammeter Electric, Hour Meter Electric
Working
System
Hitch System 3-Point hydraulic hitch
PTO Rear Rectangle Spline, 6 Teeth
PTO Speed 540rpm
After-sales Service: 1 Year
Warranty: 1 Year
Type: Wheel Tractor
Usage: Farm Tractor, Garden Tractor, Lawn Tractor
Certification: ISO, CE
Drive Wheel: 2WD

###

Customization:

###

Items Description
Model MODEL T-180
Power & Type 18HP, 4×2
Engine Model ZS1105
Bore×Stroke(mm) 105
Cooling System Water-Cooled, Four Strokes,Direct in Injection
Starting System Electrical Starting
Dimension Size L*W*H (mm) 2400×1310×1750
Wheel Base (mm) 1100~1300
Wheel Tread (mm)  F/R 1100~1300/1100~1300
Min Ground Clearance(mm) 270
Structure Weight(kg) 750
Transmission Type Sliding
No. of Gear 3×2F + 1R
Size of belts B2150×3
Clutch Type Dry, Double Discs,
Normally Jointing and Fricting Type
Running
System
Tyre F/R 6.00-12/7.50-20
Steering Mechanical Steering
Brake Toe Type Brake
Sensors On The Dashboard Water Temperature Gauge,
Oil Pressure Gauge
Ammeter Electric, Hour Meter Electric
Working
System
Hitch System 3-Point hydraulic hitch
PTO Rear Rectangle Spline, 6 Teeth
PTO Speed 540rpm

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
Shaft Collar

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China CE Approved, Hot Sale Multifunctional 12HP 15HP 18HP 20HP Belt Drive Small/Mini Farm Tractor     slip clutch pto shaftChina CE Approved, Hot Sale Multifunctional 12HP 15HP 18HP 20HP Belt Drive Small/Mini Farm Tractor     slip clutch pto shaft
editor by czh 2022-12-29

China OEM ODM Tractor Parts Pto Drive Shaft pto shaft clutch

Product Description

transmission shaft

The travel shaft produced by our firm ranges from twenty hp to 150 hp.

Relationship methods consist of involute spline, sq. tube, lemon tube, cat tube, star tube, etc.

The spokes at equally ends adopt internationally-utilized rectangular splines and are frequently utilised in different agricultural equipment.

Unique goods can also be custom-made in accordance to customer demands and specialized specs.

FAQ

one. Q: Are your items cast or cast?

    A: All of our goods are cast.

2. Q: Do you have a CE certificate?
    A: Of course, we are CE competent.
3. Q: What is the horse electrical power of the pto shaft are offered?
    A: We supply a total selection of pto shaft, ranging from 16HP-200HP.
four. Q: How several splined specification do you have ?
    A: We generate 1 1/8″-Z6, 1 3/8″-Z6, 1 3/4″-Z6, 1 3/8″- Z21, 1 3/4″-Z20, 8X42X48X8 and 8X32X38X6 splines.
5. Q: How about the guarantee?
    A: We guarantee 1 12 months guarantee. With high quality difficulties, we will ship you the new merchandise for cost-free in next cargo.
6. Q: What’s your payment conditions?
    A: T/T, L/C, D/A, D/P….
seven. Q: What is the shipping and delivery time?
    A: thirty days soon after acquiring your innovative deposit.
eight. Q: What is your MOQ?
    A: fifty PCS for every single variety.

US $45
/ Piece
|
10 Pieces

(Min. Order)

###

Material: Medium Carbon Steel,Low Carbon Steel,Alloy Steel..
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: as Client′s Requirements
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $45
/ Piece
|
10 Pieces

(Min. Order)

###

Material: Medium Carbon Steel,Low Carbon Steel,Alloy Steel..
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: as Client′s Requirements
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

drive shaft shop
China OEM ODM Tractor Parts Pto Drive Shaft     pto shaft clutchChina OEM ODM Tractor Parts Pto Drive Shaft     pto shaft clutch
editor by czh 2022-12-14

China Agricultural Friction Clutch Tractor Pto Transmission Shafts adjustable pto shaft

Solution Description

Agriculture Cardan plastic guard tractor PTO shaft

one)Substance: Spring steel, 65Mn, 60Si2Mn &lparSup6), 28SiMnB
2)Process: Forged
3)Heat remedy: Normalized-hardened and tempered
four)Hardness: 40 – 50HRC
5)Functioning hours: two hundred-250 hrs.

Lefa has created many spare parts for Japanese employed tractors in the earlier 11 several years. We designed the parts according to samples presented by consumers.

Lefa Tractor Areas rewards:

1. Most components we have drawings. We can offer assemble drawing for your checking.
2. Most parts are in inventory. You can check the stock with us if you need to have.
3. Sample order also acceptable ahead of bulk purchase.
4. Situated in HangZhou, only 1 hour length to ZheJiang .
five. Europe industry: We have Europe department in France. We hold some inventory in France.
PTO shaft Technique data:

FAQ:
Q1: Can I get small amount of your areas for Sample&quest
A: Of course, we can supply you sample if we have inventory, and will deliver you by DHL, FEDEX in accordance to your demands, or uncover the most inexpensive Forwards for you.

Q2&semi How could I know if the product ideal for my tractor or not&quest
A: You should notify us which product you are intrigued in. We will supply you the major sizes, or you can give your drawings or samples, we will make in accordance to your ask for.

Q3: I want to discover a provider for my new products. Can you support me&quest
A: Indeed. Remember to kindly offer you me your drawings or samples. Our engineer will make the drawing and create for you. We will quotation you the value.

Q4: How long for you to make a new solution&quest
A: Generally 20-35days for the drawing types and 35-forty days for the sampled kinds.

Japanese tractor spare parts in Stock 
tractor rim   gears 
 kit coupling   bearing 
 steering wheel  tractor website link hitch 
 PTO shaft  tractor sealing KB-TX 
tractor blades   lamps 
tractor hitch YM F14&solF15   link hitch 
 tyre   sealing 
 gasket   light
 air filter  tractor hub 
 filter element   brake shoes 
 air strainer element   calande 
air filter cartridge   hitch 
 cardan  tractor ignition key 
 tractor drinking water pipe   klaxon 
 disc clutch KB-TX  mass tractor 
 counter   battery cap 
 clutch   ratchet wheel 
tractor bulb   oil pressor 
tractor light   radiator cap 
 exhaust collector  tractor regulator 
Tractor keys  stickers 
 gasket   light
tractor blades   lamps 

Material: N/a
Load: N/a
Stiffness & Flexibility: N/a
Journal Diameter Dimensional Accuracy: N/a
Axis Shape: N/a
Shaft Shape: N/a

###

Customization:

###

Japanese tractor spare parts in Stock 
tractor rim   gears 
 kit coupling   bearing 
 steering wheel  tractor link hitch 
 PTO shaft  tractor sealing KB-TX 
tractor blades   lamps 
tractor hitch YM F14/F15   link hitch 
 tyre   sealing 
 gasket   light
 air filter  tractor hub 
 filter element   brake shoes 
 air strainer element   calande 
air filter cartridge   hitch 
 cardan  tractor ignition key 
 tractor water pipe   klaxon 
 disc clutch KB-TX  mass tractor 
 counter   battery cap 
 clutch   ratchet wheel 
tractor bulb   oil pressor 
tractor light   radiator cap 
 exhaust collector  tractor regulator 
Tractor keys  stickers 
 gasket   light
tractor blades   lamps 
Material: N/a
Load: N/a
Stiffness & Flexibility: N/a
Journal Diameter Dimensional Accuracy: N/a
Axis Shape: N/a
Shaft Shape: N/a

###

Customization:

###

Japanese tractor spare parts in Stock 
tractor rim   gears 
 kit coupling   bearing 
 steering wheel  tractor link hitch 
 PTO shaft  tractor sealing KB-TX 
tractor blades   lamps 
tractor hitch YM F14/F15   link hitch 
 tyre   sealing 
 gasket   light
 air filter  tractor hub 
 filter element   brake shoes 
 air strainer element   calande 
air filter cartridge   hitch 
 cardan  tractor ignition key 
 tractor water pipe   klaxon 
 disc clutch KB-TX  mass tractor 
 counter   battery cap 
 clutch   ratchet wheel 
tractor bulb   oil pressor 
tractor light   radiator cap 
 exhaust collector  tractor regulator 
Tractor keys  stickers 
 gasket   light
tractor blades   lamps 

drive shaft assembly parts
China Agricultural Friction Clutch Tractor Pto Transmission Shafts     adjustable pto shaftChina Agricultural Friction Clutch Tractor Pto Transmission Shafts     adjustable pto shaft
editor by czh 2022-11-29

Kubota supplier made in China – replacement parts – shaft generator pto pti Tractor Steel Iron Clutch Disc Cover with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Kubota  supplier  made in China - replacement parts -   shaft generator pto pti Tractor Steel Iron Clutch Disc Cover  with ce certificate top quality low price

put up hole digger pto It 2012 mercedes c300 front push shaft substitution is series 4 pto shaft our how to eliminate pto shaft from kubota tractor goal king kutter pto shaft protect to tractor pto shaft hook up provide extending pto shaft a pto shaft at rural king extensive welding a driveshaft variety renault megane push shaft of top quality merchandise at reasonably priced prices, offer the ideal support for customers happy and lead to our continued enhancement. Our business is found in XiHu HangZhou Zhejiang Province. T We developed and produced several tractor spare parts for Japanese Tractors&interval

The elements for instance&colon Tyres&comma rim Jante&comma Kit coupling KB-TX 3 level linkage&period Exhaust pipe Steering wheel&interval Package coupling YM F14&solF15 ect&period of time

Most of the spare components are with inventory&period of time If you are intrigued in&comma make sure you come to feel easy to contact me&period of time

EPT has developed many spare parts for Japanese employed tractors in the p EPT eleven many years&interval We produced the areas in accordance to samples presented by clients&time period

EPT Tractor Components positive aspects&colon
one&interval Most elements we have drawings&time period We can supply assemble drawing for your checking&period
2&interval Most components are in inventory&time period You can check out the stock with us if you need to have&period of time
3&period Sample buy also suitable before bulk order&period
4&period Positioned in HangZhou&comma only 1 hour length to ZheJiang &interval
5&period of time Europe market place&colon We have Europe branch in France&time period We preserve inventory&period of time

FAQ&colon
Q1&colon Can I acquire small amount of your elements for Sample&quest
A&colon Of course&comma we can provide you sample if we have stock&comma and will send out you by DHL&comma FEDEX according to your specifications&comma or find the most affordable Forwards for you&time period
Q2&semi How could I know if the item suited for my tractor or not&quest
A&colon You should inform us which item you are intrigued in&period of time We will supply you the principal measurements&comma or you can offer your drawings or samples&comma we will make according to your ask for&interval
Q3&colon I w EPT to discover a supplier for my new merchandise&period of time Can you support me&quest
A&colon Of course&period Remember to kindly offer me your drawings or samples&time period Our engineer will make the drawing and develop for you&period We will quotation you the price&time period
This fall&colon How long for you to make a new item&quest
A&colon Generally 20-35days for the drawing kinds and 35-forty days for the sampled kinds&interval

Listing of tractor areas&colon

Name  Clutch disc for tractors
32001  EPT &lparXL442C-Z&rpar
32002 Iseki &lparXL505C-Z&rpar
32003 YMF14&sol16 &lparXL1334C&rpar
32004 YMF1401&sol1901 XL393CT-one
32005 B1600 &lparXL754C&rpar
32006 TU1400&solB1400&lparXL145C&rpar
33001 TU1400  XL571Y
33002 EPT  xl571y t1
33003 YM14&sol16  XL598Y
33004 YM1401  XL593Y
33005 B1600  XL124Y

 

Japanese tractor spare parts in Stock 
tractor rim   gears 
 kit coupling   bearing 
 steering wheel  tractor url hitch 
 PTO shaft  tractor sealing KB-TX 
tractor blades   lamps 
tractor hitch YM F14&solF15   link hitch 
 tyre   sealing 
 gasket   light
 air filter  tractor hub 
 filter element   brake shoes 
 air strainer element   calande 
air filter cartridge   hitch 
 cardan  tractor ignition key 
 tractor h2o pipe   klaxon 
 disc clutch KB-TX  mass tractor 
 counter   battery cap 
 clutch   ratchet wheel 
tractor bulb   oil pressor 
tractor light   radiator cap 
 exhaust collector  tractor regulator 
Tractor keys  stickers 
 gasket   light
tractor blades   lamps 

Kubota  supplier  made in China - replacement parts -   shaft generator pto pti Tractor Steel Iron Clutch Disc Cover  with ce certificate top quality low price

Gear China king kutter slip clutch Box Km6003 for Agri Tractor Implements with ce certificate top quality low price

We – EPG Team the greatest agricultural gearbox and pto manufacturing unit in China with five various branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Gear  China  king kutter slip clutch Box Km6003 for Agri Tractor Implements with ce certificate top quality low price

Recognized in the year 1 0571  at EPG, we “EPG” are a Sole Proprietorship based agency, engaged as the foremost Manufacturer of Mist Blower, Agricultural Gearbox and numerous far more. Our items are higher in desire owing to their top quality good quality and inexpensive costs. Furthermore, we make certain to timely provide these products to our clientele, through this we have received a massive clients base in the market.

Equipment box KM6003 for agri tractor implements

The  Gearboxes are developed for connecting equipment pumps to farm tractor electrical power consider offs (PTO).Output speed of electrical power consider offs is 540rpm which can be in comparison with the appropriate running speeds of hydraulic pumps.Distinct input managing speeds can also be suited,offered that the PTO gearbox output velocity does not exceed 3000 rpm.

Gears
Manufactured in Metal UNI 18 PCR M03.Stub teeth promise extremely high resistance and operate very quietly.

Shafts
Created in metal UNI sixteen CRN4.They are coupled with splined gears and are designed to stand the torque values stated in the catalogue.

Lubrication
SAE ninety equipment oil should be place in the pto gearbox prior to use, alter the oil right after the first sixty-80 hrs and then each and every twelve months or 1500 hours which at any time fal EPT 1st.

Servicing
Please check the oil degree by way of the EPT oil window each and every fifty hrs.Doing work temperatures need to not exceed one hundred twenty degrees celcius beneath continuos obligation cycle.

Packaging & Shipping

Plastic bag packing for one particular piece / two pieces in one particular exporting carton / 100 cartons place on a pallet

FAQ

 

1.Q:Is your company a trading firm or a manufacturer?

A:Our business is a trading organization also a manufacturer, we have our possess manufacturing unit to produce gearbox, pump assistance..And many others

Also we distribute equipment pumps, tractor equipment,dump truck pump  from picked top quality suppliers to meet up with customers’ variable need.

 

two.Q:What about the good quality control and warranty ?

A:”High quality first, Consumers foremost”.Each and every piece of goods is cheeked and tested strictly one particular by 1 prior to packing and transport.

Our goods have 1 yr guarantee, specialized assistance is unlimited from us.

 

three.Q:Can you offer samples for examining and screening?

A:Indeed,we give totally free samples for examining the create good quality and true overall performance of our goods,the freight want to be coverd by customer.

 

4.Q:How can I get to your business?

A:Our organization tackle is No. 571 Huaxu Highway,Xihu (West Lake) Dis. district,ZheJiang ,China

It is about 30 minutes by auto from ZheJiang Xihu (West Lake) Dis.ao airport or ZheJiang Xihu (West Lake) Dis.ao Railway station.

Gear  China  king kutter slip clutch Box Km6003 for Agri Tractor Implements with ce certificate top quality low price

Gear  China  king kutter slip clutch Box Km6003 for Agri Tractor Implements with ce certificate top quality low price