Tag Archives: tractor tiller

China Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft with Good quality

Merchandise Description

wide angle pto shafts cardan tractor tractor travel nylon sheets handbook driven clutch friction telescopic tube gearbox for tiller agricultural pto shaft

US $10-99
/ Piece
| 100 Pieces

(Min. Order)

###

Material:	Carbon Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

US $10-99
/ Piece
| 100 Pieces

(Min. Order)

###

Material:	Carbon Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis

###

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft Collar The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft Collar A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft Collar One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft with Good quality
editor by czh 2023-01-21

China CE Certificate Tlk 110HP Farm Machine Mini Tractor Like John Deere 4weel Tractors with Agriculture Power Tiller Agricultural Machinery for Farm agri supply pto shaft

Leave a reply

Product Description

Item Description:
TLK TD1004 90-130HP 4 wheel drive Wheel Agricultural Farm Tractor China large wheeled farming tractor with ISO Ce Certification for Sale

^{Tractor Main Features and Rewards:
one.Geared up renowned brand motor exhibiting superior potential,reduced fuel intake,higher economic effectiveness.
2. Streamlined visual appeal design and style, lovely and generous.
three.Transmission Case undertake meshed change and include the gearbox interlock unit tends to make the operation far more efficiently,reputable and simpler.
4. Double motion clutch with disc spring, execute steadily and easy to run.
5. Completely hydraulic steering method drastically reduced driver’s work power.
6. Soaked disc brake system, trustworthy brake overall performance.
seven. Different injection of hydraulic oil, trustworthy to function.
8. The lifter with pressure and place adjustment, with dependable raise.
nine. Tractor PTO:
PTO in Double velocity : 540/760r/min Optional, For high working effectiveness.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural equipment of all above the entire world.
10. Huge Chassis and Large-responsibility Rear axle for Durable Powerful machine.
eleven. Total sequence mild, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all offered, for more relaxed driving setting}

Primary Specialized Requirements:

Model			TK1004	TK1104	TK1204	TK1304
Type			4×4 Wheeled Type	4×4 Wheeled Sort	4×4 Wheeled Variety	4×4 Wheeled Variety
Dimensions of Tractor (mm)	Length		4480	4480	4480	4480
	Width		2050	2050	2050	2050
	Height		2570	2570	2570	2570
	Tread	Front Wheel	1610(typical)	1610(common)	1610(typical)	1610(common)
	Tread	Rear Wheel	1608(common)	1608(typical)	1608(typical)	1608(typical)
	Wheel Base		2366	2366	2366	2366
	Min. Floor Base		405(the bottom of front axle)	405(the bottom of front axle)	405(the base of front axle)	405(the base of entrance axle)
Min. Usage Mass(kg)			4200	4200	4200	4200
Engine	Model		YTO LR4M3Z	YTO LR4M3Z	YTO LR6B5-23	YTO LR6M5-23
	Type		Vertical, drinking water cooled and 4-stroke	Vertical, water cooled and 4-stroke	Vertical, h2o cooled and 4-stroke	Vertical, h2o cooled and 4-stroke
	Rated Power(kw)		66.2	80.8	88.two	95.six
	Rated Rev.(r/min)		2300	2300	2300	2300
	Fuel		Diesel Oil	Diesel Oil	Diesel Oil	Diesel Oil
Tire	Front Wheel		twelve.4-24	twelve.4-24	12.4-24	12.4-24
Tire	Rear Wheel		sixteen.9-34	16.9-34	16.9-34	sixteen.9-34
Clutch			Dry-friction, one disc and 2 stage	Dry-friction, single disc and 2 phase	Dry-friction, one disc and 2 phase	Dry-friction, single disc and 2 stage
Steering			Hydraulic sort	Hydraulic sort	Hydraulic kind	Hydraulic type
Transmission Box			4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed
Suspension Variety			Publish Positioned Tri-stage Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-level Suspension Catalogue 2 or 3 (optional)	Publish Positioned Tri-level Suspension Catalogue 2 or 3 (optional)	Publish Positioned Tri-position Suspension Catalogue 2 or 3 (optional)
PTO	Sort and Rev.(r/min)		Post-situation, unbiased, 760/850 or 540/a thousand or 540/760 (optioanl)	Publish-place, independent, 760/850 or 540/1000 or 540/760 (optioanl)	Submit-situation, impartial, 760/one thousand or 540/one thousand or 540/760 (optioanl)	Publish-placement, impartial, 760/one thousand or 540/1000 or 540/760 (optioanl)
PTO	Spline Size		I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 enamel	I38 Rectangle Spline with 8 enamel	I38 Rectangle Spline with 8 teeth

Technological innovation & Innovation:

WeiFang Telake has established a expert R & D group, understood the self-handle capacity of main factors by integrating the industry’s
useful assets, constructed a steady high quality control program.
Invested tens tens of millions to introduce clever mechanization complete production line, computerized chassis creation line, gearbox processing line and welding
robots, processing facilities and other sophisticated production lines and tools, to obtain an annual manufacturing ability of thirty,000 tractors.

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Packaging & Shipping and delivery:
-Delivery time:twenty- 30 days.

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Certifications:

Typical troubles
(1) Are you a production manufacturing unit or a trading company?
We are a manufacturing unit with 20 a long time of skilled creation knowledge in the field of 25hp-240hp tractors, found in HangZhou City, ZheJiang Province, China. Our manufacturing facility has handed ISO9001, CCC, CE, SGS and BV certification. We also have a quality management section to obtain goods for buyers. This is why the cost of our tractors is so reasonable.
(2) Can we print the brand or firm title on your item or packaging?
of program. Your emblem can be printed on your product by embossing, self-adhesive or silk-monitor printing.
(3) About the cost
The price tag is negotiable. It can be altered in accordance to the choices or packaging of the tractor.
(4) Relating to payment or other issues
We acknowledge LC, TT, if you have other concerns, make sure you electronic mail me or chat with me right.
Contact
Welcome to our manufacturing unit
Adhere to the company tenet of “Integrity-based mostly, Good quality Very first”, and wholeheartedly supply you with the very best merchandise and wholehearted service. We actively cooperate with research establishments and multinational firms to accomplish ongoing innovation. HangZhou Telake Agricultural Tools CO.,LTD welcomes domestic and overseas clients to visit and guide!
HangZhou Telake Agricultural Tools CO.,LTD
Adress: East of Xihu (West Lake) Dis. Road,South of Cailin Street,Xihu (West Lake) Dis. Financial District,HangZhou,ZheJiang ,China

US $12,500-14,000
/ set
| 1 set

(Min. Order)

###

After-sales Service:	1year
Type:	Wheel Tractor
Usage:	Farm Tractor, Garden Tractor, Lawn Tractor
Certification:	ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC
Drive Wheel:	4WD
Emission Standard:	Euro III

###

Samples:	US$ 12500/set 1 set(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model			TK1004	TK1104	TK1204	TK1304
Type			4×4 Wheeled Type	4×4 Wheeled Type	4×4 Wheeled Type	4×4 Wheeled Type
Dimensions of Tractor (mm)	Length		4480	4480	4480	4480
	Width		2050	2050	2050	2050
	Height		2570	2570	2570	2570
	Tread	Front Wheel	1610(usual)	1610(usual)	1610(usual)	1610(usual)
	Tread	Rear Wheel	1608(usual)	1608(usual)	1608(usual)	1608(usual)
	Wheel Base		2366	2366	2366	2366
	Min. Ground Base		405(the bottom of front axle)	405(the bottom of front axle)	405(the bottom of front axle)	405(the bottom of front axle)
Min. Usage Mass(kg)			4200	4200	4200	4200
Engine	Model		YTO LR4M3Z	YTO LR4M3Z	YTO LR6B5-23	YTO LR6M5-23
	Type		Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke
	Rated Power(kw)		66.2	80.8	88.2	95.6
	Rated Rev.(r/min)		2300	2300	2300	2300
	Fuel		Diesel Oil	Diesel Oil	Diesel Oil	Diesel Oil
Tire	Front Wheel		12.4-24	12.4-24	12.4-24	12.4-24
Tire	Rear Wheel		16.9-34	16.9-34	16.9-34	16.9-34
Clutch			Dry-friction, single disc and two stage	Dry-friction, single disc and two stage	Dry-friction, single disc and two stage	Dry-friction, single disc and two stage
Steering			Hydraulic type	Hydraulic type	Hydraulic type	Hydraulic type
Transmission Box			4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed
Suspension Type			Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)
PTO	Type and Rev.(r/min)		Post-position, independent, 760/850 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/850 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/1000 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/1000 or 540/1000 or 540/760 (optioanl)
PTO	Spline Size		I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth

US $12,500-14,000
/ set
| 1 set

(Min. Order)

###

After-sales Service:	1year
Type:	Wheel Tractor
Usage:	Farm Tractor, Garden Tractor, Lawn Tractor
Certification:	ISO, CE, EPA, CCC, ISO/TS16949, EEC, XQC
Drive Wheel:	4WD
Emission Standard:	Euro III

###

Samples:	US$ 12500/set 1 set(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model			TK1004	TK1104	TK1204	TK1304
Type			4×4 Wheeled Type	4×4 Wheeled Type	4×4 Wheeled Type	4×4 Wheeled Type
Dimensions of Tractor (mm)	Length		4480	4480	4480	4480
	Width		2050	2050	2050	2050
	Height		2570	2570	2570	2570
	Tread	Front Wheel	1610(usual)	1610(usual)	1610(usual)	1610(usual)
	Tread	Rear Wheel	1608(usual)	1608(usual)	1608(usual)	1608(usual)
	Wheel Base		2366	2366	2366	2366
	Min. Ground Base		405(the bottom of front axle)	405(the bottom of front axle)	405(the bottom of front axle)	405(the bottom of front axle)
Min. Usage Mass(kg)			4200	4200	4200	4200
Engine	Model		YTO LR4M3Z	YTO LR4M3Z	YTO LR6B5-23	YTO LR6M5-23
	Type		Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke	Vertical, water cooled and 4-stroke
	Rated Power(kw)		66.2	80.8	88.2	95.6
	Rated Rev.(r/min)		2300	2300	2300	2300
	Fuel		Diesel Oil	Diesel Oil	Diesel Oil	Diesel Oil
Tire	Front Wheel		12.4-24	12.4-24	12.4-24	12.4-24
Tire	Rear Wheel		16.9-34	16.9-34	16.9-34	16.9-34
Clutch			Dry-friction, single disc and two stage	Dry-friction, single disc and two stage	Dry-friction, single disc and two stage	Dry-friction, single disc and two stage
Steering			Hydraulic type	Hydraulic type	Hydraulic type	Hydraulic type
Transmission Box			4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed	4×(2+1)×2 Composed
Suspension Type			Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)	Post Positioned Tri-point Suspension Catalogue 2 or 3 (optional)
PTO	Type and Rev.(r/min)		Post-position, independent, 760/850 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/850 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/1000 or 540/1000 or 540/760 (optioanl)	Post-position, independent, 760/1000 or 540/1000 or 540/760 (optioanl)
PTO	Spline Size		I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth	I38 Rectangle Spline with 8 teeth

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.
Shaft Collar

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China CE Certificate Tlk 110HP Farm Machine Mini Tractor Like John Deere 4weel Tractors with Agriculture Power Tiller Agricultural Machinery for Farm agri supply pto shaft
editor by czh 2023-01-09

China 1gqn140 Rotary Tiller for Farm Tractor 30-40HP Agricultural Paddy Gear Drive Cultivator Beater Plowing Tiller Machine Orchard Agriculture CE Dry Field Machinery pto shaft extension

Leave a reply

Item Description

Produced in China, Offered to the globe
Versatile, Easy, Affordable, Powerful, Dependable

Rotary Tiller merchandise description

Rotary Tiller Product Description

_{1GQN sequence rotary tiller with center gear transmission, it can be mounted with the tractor 12-120hp. We can’t see the wheel tracks on the soil following it worked. The top quality of rotary tiller is great and the perform quite nicely. It is suited to dry land and paddy subject. It can help save time, labour and money etc.}

_{Major income territory: regions Europe, the United States, Russia, Ukraine, South America, Africa, southeast Asia and Australia.}

Rotary Tiller Item Offering Points
_{one. Transmission: gear drive. By PTO linkage.
2. Gravity gearbox is created of casting iron. Materials functionality is much better. Not simple damaged.
three. The suspension plate shape is not simple to deform.
four. Chain device hand adjustable. Much more easy and dependable.
5. Side protection plates are added CZPT the rear deflection. This device helps prevent the soil traveling out.
six. The tilling peak can be adjustable.
7. The construction is firm and steady.
eight. Solid Blades:maintaining a sharp reducing edge and maximizing the performance of the chipper. They are created of particular content, with in excess of occasions warmth treatment process to guarantee wonderful functioning efficiency.
nine. The suspension plate form is made by laser chopping,molding location}

Rotary Tiller merchandise technological parameters

Model	1GQN-one hundred twenty five	1GQN-a hundred and forty	1GQN-150	1GQN-one hundred sixty	1GQN-180	1GQN-two hundred	1GQN-220	1GQN-240
Functioning Width (mm)	125	1400	1500	1600	1800	2000	2200	2300
Functioning Depth (mm)	120-one hundred sixty				120-one hundred eighty
PTO Pace (r/min)	540
No. of Disc (laptop)	thirty	36	42	42	forty eight	fifty four	sixty	66
Linkage	Three Level Mounted
Matched Energy (hp)	thirty~40	35-forty	forty-45	forty-fifty	fifty-60	sixty-eighty	70-ninety	80-120

Rotary Tiller particulars picture exhibit
GW sequence rear tine tiller (gear) display
Total series of share plow, turnover plow, disc plow picture mixture exhibit

Complete assortment of disc harrow picture screen

Farm device manufacturing workshop screen

Rotary Tiller packing and shipping and delivery hyperlink display

Entire variety of tractor merchandise exhibit

Our company generates other agricultural equipment display
Factory introduction
^{ZheJiang Euro Star Equipment Manufacture Co., Ltd. is a specialist Equipment and gear producer integrating R&D, design and style, producing, product sales and support. The company’s products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on.
As a professional equipment equipment producer in China, the company has fully commited itself to supply all-spherical resolution to global contemporary agricultural mechanization. The company has integrating higher-stop products and systems resources all around the planet by upgrading of technologies, top quality and provider and bringing forth new suggestions to produce revolutionary products as so to enhance status and market place share of CZPT in the planet phase by action.
The organization has passed the ISO9001:2015 intercontinental good quality management system certification, and based mostly on this, masking solution improvement, part buy, creation and producing, high quality inspection, revenue and after-market support, so as to handle the merchandise top quality on the entire.
Supported by thorough quality assurance technique and produced product sales and support network, the company has made leaping enhance of income in domestic market place through trustful quality and fantastic support manner. Aside from, Most of the company’s merchandise have handed the European CE certification.merchandise are exported to Europe, The usa, Latin The usa, the Middle East, Asia-Pacific, CIS, Africa and much more than eighty countries and locations.Our goods have been acknowledged by all overseas customers, and we are satisfied to create lengthy-phrase cooperative interactions with new friends.
Xihu (West Lake) Dis.g at satisfying the buyers, we have worked tough to provide excellent and fast service to buyers equally at house and abroad through sophisticated technologies, developed products and comprehensive community so as to improve the client satisfaction.
In future, the company will adhere to the basic principle of audio business operation, constant innovation and opening up and cooperation to develop more substantial-conclude equipment and tools dependent on recent ones for the society and for agriculture and add to world-wide present day agriculture creation.}
Service
One-end company chain services support system
With an international support staff with rich experience and outstanding skill, organization is committed to build a comprehensive service promise technique, which is skilled, quickly, successful and complete. Every single consumer in overseas would get a entire-approach services promise which includes pre-sales, on sale and soon after sales by means of the way of marketplaces, spare components, training support and specialized assistance.

one) Industry Service
_{^{Provider Mode : Stationary Position + Circuit Service
Extended-phrase Stationary Level Support
Quick-time period Circuit Technology Assist Provider
Provider Process: Normal, Substantial Successful, Seasonable
Services Picture: Specialist, Unified}}

two) Spare Areas Support
Spare Areas Promise Measures: Supplier+ Spare Portion Warehouse
100% unique spare parts guarantee excellent quality
Bar-code technique adopted in the complete process assures accuracy and promptness
Specialist and precise bundle and logistics assure protected and relieved transportation.

three) Instruction Services
Characteristic Education Method: invite the experts of sellers to manufacturing unit for instruction, deliver engineers to sellers for training
A total range of coaching equipment, multi-language training supplies, vivid coaching movie
Skilled coaching instructors with wealthy services knowledge and very good conversation capability
One particular-to-1 particular assignment instruction
Remote online community education

four) Complex Assist
The complete approach Technological innovation assist addresses on sale and following-sale services.

Phrases of the offer:
_{one). Shipping: twenty days for standard orders
two). Price: We have price tag on foundation FOB HangZhou and CIF your vacation spot for your option
3). Payment conditions for very first purchase:
—–T/T thirty% deposit and stability before cargo
—–100% L/C at sight
4). Payment for prolonged conditions cooperation of very good popularity companions, we have SINOSURE insurance for our VIP clientele, and we can supply credit history services right after we common with every single other. We are searching for partnership for lengthy-phrase enterprise}

FAQ:
Why decide on us?
1). The high quality is assured thanks to strong technical assistance ,very first class component ,superior production line and strict top quality management system.
2). Be leading Professional in worldwide market for far more than 5 many years, China Renowned Export Brand name advisable by CCCME (China Chamber of Commerce for Import and Export of Machinery and Digital Products)
3). One particular-end services with a huge spare parts warehouse and professional service team .No matter the place you are, you are guaranteed of Eurostar’ s warm reception, reputable and effective specialist providers and persistent care.

How Shipment?
We have worked with several globe renowned shipping carriers and can arrange shipment to any region in the entire world, it can preserve your time and funds. We can offer airfreight and CZPT services.

Contact us
Mr. Duke Zhang
ZheJiang Euro Star Machinery Manufacture Co., Ltd.
Incorporate: 198 HangZhou Road, Xihu (West Lake) Dis. District, HangZhou City, ZheJiang Province,P.R.C.
Internet:eurostartractor

EUROSTAR Buyers ALL Above THE World

US $600-970
/ Set
| 1 Set

(Min. Order)

###

After-sales Service:	1 Years
Type:	Rotary Tiller
Application Field:	Agriculture, Forestry
Farming Policy:	Dry Cultivating Machinery
Power Source:	Tractor
Operation:	Soil Preparation Machinery, Continuous Running Operation

###

Customization:	Available \| Customized Request

###

Model	1GQN-125	1GQN-140	1GQN-150	1GQN-160	1GQN-180	1GQN-200	1GQN-220	1GQN-240
Working Width (mm)	125	1400	1500	1600	1800	2000	2200	2300
Working Depth (mm)	120-160				120-180
PTO Speed (r/min)	540
No. of Disc (pc)	30	36	42	42	48	54	60	66
Linkage	Three Point Mounted
Matched Power (hp)	30~40	35-40	40-45	40-50	50-60	60-80	70-90	80-120

US $600-970
/ Set
| 1 Set

(Min. Order)

###

After-sales Service:	1 Years
Type:	Rotary Tiller
Application Field:	Agriculture, Forestry
Farming Policy:	Dry Cultivating Machinery
Power Source:	Tractor
Operation:	Soil Preparation Machinery, Continuous Running Operation

###

Customization:	Available \| Customized Request

###

Model	1GQN-125	1GQN-140	1GQN-150	1GQN-160	1GQN-180	1GQN-200	1GQN-220	1GQN-240
Working Width (mm)	125	1400	1500	1600	1800	2000	2200	2300
Working Depth (mm)	120-160				120-180
PTO Speed (r/min)	540
No. of Disc (pc)	30	36	42	42	48	54	60	66
Linkage	Three Point Mounted
Matched Power (hp)	30~40	35-40	40-45	40-50	50-60	60-80	70-90	80-120

Choosing the Right PTO Shaft

There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.

Transmission PTO

Shaft Collar If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.

Economy PTO

Shaft Collar The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.

Two-stage clutch on pto shaft

Shaft Collar If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.

Types of independent pto shafts

Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
China 1gqn140 Rotary Tiller for Farm Tractor 30-40HP Agricultural Paddy Gear Drive Cultivator Beater Plowing Tiller Machine Orchard Agriculture CE Dry Field Machinery pto shaft extension
editor by czh 2023-01-06

China Power Tiller Farm Tractor Pto Bevel Flail Lawn Mower Transmission Gearbox for Agricultural Field adjustable pto shaft

Leave a reply

Product Description

Energy Tiller Correct Angle Farm Tractor Pto Bevel Flail lawn Mower Transmission Gearbox B10 for Agricultural Discipline

Established in Nov.2002,HangZhou CZPT is a expert maker and supplier in providing spare elements and components for agricultural machinery. In addition to the 3000 standards parts, we also supply our customers tailor-manufactured content articles or assemblies that are for specific software.

HangZhou CZPT concentrated on the improvement and creation of gearboxes with a specialist crew and continue to understand sophisticated technologies the use of first-course products higher quality source chain system, relying on these, the gearboxes get substantial track record amongst consumers at house and overseas.

These gearboxes are extensively used in rotary tillers, lawn mowers, harvesters, hole diggers, pesticide sprayers, irrigation equipment, fertilizer spreaders, blenders and so on. The main items are:

–Straight bevel gearbox
–Spiral bevel gearbox
–Planetary reducer
–Worm gearbox

HangZhou CZPT Intercontinental Investing Co.,Ltd is a present day company specilizing in the growth, generation, income and companies of PTO shaft. We adhere to the basic principle of “Precise Driveline, Advocate Environmentally friendly”, using innovative technological innovation and equipments to make certain all the complex requirements of exact driveline. So that the transmission effectiveness can be maxmized and every single drop of source of customers’ can be saved. Meanwhile, we have a customer-centric provider technique, supplying a entire range of pre-sale, sale and right after-sale support. Buyer fulfillment is our forever pursuit.

We follow the principle of individuals initial, striving our best to established up a pleasurable environment and system of functionality for every single staff, so absolutely everyone can be self-consciously active to join in “Exact Driveline, Adocate Eco-friendly” to embody the self-really worth, organization benefit and social value.

Newnuro’s goal is: minimizing customer’s obtain funds, assistance consumers to receive much more market.
Newnuro always finds remedy for customers.Consumer pleasure is our greatest objective and forever pursuit.

US $70
/ Piece
| 10 Pieces

(Min. Order)

###

Application:	Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Single-Step
Ratio:	1:2

###

Customization:	Available \| Customized Request

US $70
/ Piece
| 10 Pieces

(Min. Order)

###

Application:	Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Single-Step
Ratio:	1:2

###

Customization:	Available \| Customized Request

Choosing the Right PTO for Your Machine

There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.

LPTO

LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.
Shaft Collar

Reverse PTO

There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.

Splined PTO

The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.
Shaft Collar

Independent PTO

Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.

LPTO shaft guard

An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.
Shaft Collar

Safety of handling a pto shaft

Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.
China Power Tiller Farm Tractor Pto Bevel Flail Lawn Mower Transmission Gearbox for Agricultural Field adjustable pto shaft
editor by czh 2023-01-05

China Pto Drived Cultivator Rotary Tiller Heavy Duty 1gqn-180 Rotary Tiller for Tractor (20HP-160HP) pto shaft tubing

Leave a reply

Product Description

VIKAS Expert Gear Pushed Rotary Tillers are best for preparation of seed beds, renovation of pastures, orchards, vineyards and mulching-in protect crops and stubble. With 28-seventy six tines for every flange, they supply a uniform mixture through cultivated depth and create free textured soil that holds moisture and lowers erosion. This rotary tiller consists of a PTO shaft with heavy duty slip clutch. Tillage width of our rotary tiller sort 4-7 feet.

VIKAS rotary tiller is strong and sturdy, easy to run, versatile to use, large operating effectiveness, easy to fix and preserve, and lower energy loss.

Specification	Matched power (hp)	Doing work width(mm)	Functioning depth(mm)	Out put speed(r/min)	Variety of tines	Excess weight (kg)	Dimension(mm)
1GQN-a hundred twenty five	20-twenty five	1250	a hundred-a hundred and eighty	540	28	182	86013801571
1GQN-140	25-30	1400	a hundred-one hundred eighty	540	32	185	86015001040
1GQN-160	30-50	1600	100-a hundred and eighty	540	forty	230	86017101100
1GQN-a hundred and eighty	50-sixty	1800	one hundred twenty-two hundred	720	56	368	96020001000
1GQN-two hundred	55-seventy five	2000	a hundred and twenty-200	720	sixty	396	96022001030
1GQN-230	sixty-eighty	2300	120-200	720	sixty four	490	one thousand25001230
1GKN-250	75-eighty	2500	a hundred and twenty-200	720	sixty eight	495	100027501150
1GKN-270	80-160	2700	120-two hundred	720	75	620	110029501200
1GKN-three hundred	90-160	3000	one hundred twenty-200	720	seventy six	650	110032501200

To Be Negotiated 1 Piece
(Min. Order)

###

After-sales Service:	1year
Type:	Rotary Tiller
Application Field:	Agriculture
Farming Policy:	Dry Cultivating Machinery
Power Source:	Tractor
Operation:	Soil Preparation Machinery, Continuous Running Operation

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specification	Matched power (hp)	Working width(mm)	Working depth(mm)	Out put speed(r/min)	Number of tines	Weight (kg)	Dimension(mm)
1GQN-125	20-25	1250	100-180	540	28	182	86013801020
1GQN-140	25-30	1400	100-180	540	32	185	86015001040
1GQN-160	30-50	1600	100-180	540	40	230	86017101100
1GQN-180	50-60	1800	120-200	720	56	368	96020001000
1GQN-200	55-75	2000	120-200	720	60	396	96022001030
1GQN-230	60-80	2300	120-200	720	64	490	100025001230
1GKN-250	75-80	2500	120-200	720	68	495	100027501150
1GKN-270	80-160	2700	120-200	720	75	620	110029501200
1GKN-300	90-160	3000	120-200	720	76	650	110032501200

To Be Negotiated 1 Piece
(Min. Order)

###

After-sales Service:	1year
Type:	Rotary Tiller
Application Field:	Agriculture
Farming Policy:	Dry Cultivating Machinery
Power Source:	Tractor
Operation:	Soil Preparation Machinery, Continuous Running Operation

###

Samples:	US$ 500/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Specification	Matched power (hp)	Working width(mm)	Working depth(mm)	Out put speed(r/min)	Number of tines	Weight (kg)	Dimension(mm)
1GQN-125	20-25	1250	100-180	540	28	182	86013801020
1GQN-140	25-30	1400	100-180	540	32	185	86015001040
1GQN-160	30-50	1600	100-180	540	40	230	86017101100
1GQN-180	50-60	1800	120-200	720	56	368	96020001000
1GQN-200	55-75	2000	120-200	720	60	396	96022001030
1GQN-230	60-80	2300	120-200	720	64	490	100025001230
1GKN-250	75-80	2500	120-200	720	68	495	100027501150
1GKN-270	80-160	2700	120-200	720	75	620	110029501200
1GKN-300	90-160	3000	120-200	720	76	650	110032501200

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
> Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.
Shaft Collar

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Pto Drived Cultivator Rotary Tiller Heavy Duty 1gqn-180 Rotary Tiller for Tractor (20HP-160HP) pto shaft tubing
editor by czh 2022-12-24

China Hot selling Farm Tract Potato CZPT Machine Tractor Small Potato Tiller 3-Point Linkage Potato Harvesters with Hot selling

Leave a reply

Product Description

1.Product description:

The FCC series potato harvester is equipped with 20-50HP tractor through the rear transmission mode. The potato harvester is used for CZPT potatoes, separating the tuber part from the soil, so that the potatoes can reach the ground from the root and stem for easy picking. It is equipped with triangle stirrer The working principle is that under the PTO drive of the tractor, the soil and tubers are separated by shaking through the shaker. The soil falls in the gap of the shaker, and the potatoes left on the shaker fall on the land behind through the vibration of the shaker

Product advantages:
compared with the traditional potato harvester with anti-entanglement wheel on both sides, can make the grass to the harvester on both sides of the movement so as to realize the normal movement of vibration row, achieve anti-entanglement grass greatly improve the efficiency of harvest

2.Product parameters:

3.Product picture:

4.Other products:

5.Our warehouse:

6.Goods delivery:

7.Sale service:

Before-sale services:
1) 24 Hours online service, quickly reply for E-mail and online ask. Xihu (West Lake) Dis. customers to choose the best applicable machine type.
2) Professionally and patiently introduction, provide the advanced, energy-saving and practical technological process.

Sale services:
1) complete parts safety stock for all machine series. Test every machine before delivery to insure good performance of machine.
2) In accordance with the agreements stipulated in the contract.

After-sale services:
1) According to the special requirements of customers,our company can ask professional engineers to CZPT with device installation online, debugging and training operators until customers are fully satisfied.
2) The quality guarantee period for machines is 1 year except the wearing parts and human damage factor.

8.Customer feedback:

FAQ:

1.Q:Are you manufacturer or trade company?

A: We are manufacturer, we have our own factory. Our factory has department for exploitation , producing, sales, after-sell service, packing , warehouse, we can offer you best products and best service.

2.Are you interested in dealership with local company?

A: Yes, we are quite interested in this business cooperation. We’d like to cooperate with some local partner to sell more machines in local market and supply better service.We can discuss more if you also interested.

3. Q: Do you sell accessories for your machine?
A: Yes, all of matching accessories for our machine are on selling, we are willing to supply the matching parts to you with low price.

4.Q: What’s your terms of packing?
A: Generally, we pack our goods in wooden cases.

5.Q: What’s your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

6.Q: What’s your terms of delivery?
A: EXW, FOB, CFR, CIF

7.Q: How about delivery time?
A: Generally, it will take 7 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

8.Q: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend, no matter where they come from;
3. If you have any feedback that is cherished to us, please send email to us.

9.Q: Do you supply samples?

A: We support sample order .

10.Others:
OEM: Support technical changes.

Free train: plant training on installation and maintenance techniques.
QC: Quality inspection before delivery for each unit.

Model	LSFCC-1
Harvest Of Rows	1
Working Width (mm)	600-800
Working Depth (mm)	100-250
PTO Speed (r/min)	540-720
Overall Weight (KG)	180
Supporting The Horsepower	20 – 50
Articulated Way	Class I three-point suspension

Model	LSFCC-1
Harvest Of Rows	1
Working Width (mm)	600-800
Working Depth (mm)	100-250
PTO Speed (r/min)	540-720
Overall Weight (KG)	180
Supporting The Horsepower	20 – 50
Articulated Way	Class I three-point suspension

How to Select a Worm Shaft and Gear For Your Project

You will learn about axial pitch PX and tooth parameters for a Worm Shaft 20 and Gear 22. Detailed information on these two components will help you select a suitable Worm Shaft. Read on to learn more….and get your hands on the most advanced gearbox ever created! Here are some tips for selecting a Worm Shaft and Gear for your project!…and a few things to keep in mind.

Gear 22

The tooth profile of Gear 22 on Worm Shaft 20 differs from that of a conventional gear. This is because the teeth of Gear 22 are concave, allowing for better interaction with the threads of the worm shaft 20. The worm’s lead angle causes the worm to self-lock, preventing reverse motion. However, this self-locking mechanism is not entirely dependable. Worm gears are used in numerous industrial applications, from elevators to fishing reels and automotive power steering.
The new gear is installed on a shaft that is secured in an oil seal. To install a new gear, you first need to remove the old gear. Next, you need to unscrew the two bolts that hold the gear onto the shaft. Next, you should remove the bearing carrier from the output shaft. Once the worm gear is removed, you need to unscrew the retaining ring. After that, install the bearing cones and the shaft spacer. Make sure that the shaft is tightened properly, but do not over-tighten the plug.
To prevent premature failures, use the right lubricant for the type of worm gear. A high viscosity oil is required for the sliding action of worm gears. In two-thirds of applications, lubricants were insufficient. If the worm is lightly loaded, a low-viscosity oil may be sufficient. Otherwise, a high-viscosity oil is necessary to keep the worm gears in good condition.
Another option is to vary the number of teeth around the gear 22 to reduce the output shaft’s speed. This can be done by setting a specific ratio (for example, five or ten times the motor’s speed) and modifying the worm’s dedendum accordingly. This process will reduce the output shaft’s speed to the desired level. The worm’s dedendum should be adapted to the desired axial pitch.

Worm Shaft 20

When selecting a worm gear, consider the following things to consider. These are high-performance, low-noise gears. They are durable, low-temperature, and long-lasting. Worm gears are widely used in numerous industries and have numerous benefits. Listed below are just some of their benefits. Read on for more information. Worm gears can be difficult to maintain, but with proper maintenance, they can be very reliable.
The worm shaft is configured to be supported in a frame 24. The size of the frame 24 is determined by the center distance between the worm shaft 20 and the output shaft 16. The worm shaft and gear 22 may not come in contact or interfere with one another if they are not configured properly. For these reasons, proper assembly is essential. However, if the worm shaft 20 is not properly installed, the assembly will not function.
Another important consideration is the worm material. Some worm gears have brass wheels, which may cause corrosion in the worm. In addition, sulfur-phosphorous EP gear oil activates on the brass wheel. These materials can cause significant loss of load surface. Worm gears should be installed with high-quality lubricant to prevent these problems. There is also a need to choose a material that is high-viscosity and has low friction.
Speed reducers can include many different worm shafts, and each speed reducer will require different ratios. In this case, the speed reducer manufacturer can provide different worm shafts with different thread patterns. The different thread patterns will correspond to different gear ratios. Regardless of the gear ratio, each worm shaft is manufactured from a blank with the desired thread. It will not be difficult to find one that fits your needs.

Gear 22’s axial pitch PX

The axial pitch of a worm gear is calculated by using the nominal center distance and the Addendum Factor, a constant. The Center Distance is the distance from the center of the gear to the worm wheel. The worm wheel pitch is also called the worm pitch. Both the dimension and the pitch diameter are taken into consideration when calculating the axial pitch PX for a Gear 22.
The axial pitch, or lead angle, of a worm gear determines how effective it is. The higher the lead angle, the less efficient the gear. Lead angles are directly related to the worm gear’s load capacity. In particular, the angle of the lead is proportional to the length of the stress area on the worm wheel teeth. A worm gear’s load capacity is directly proportional to the amount of root bending stress introduced by cantilever action. A worm with a lead angle of g is almost identical to a helical gear with a helix angle of 90 deg.
In the present invention, an improved method of manufacturing worm shafts is described. The method entails determining the desired axial pitch PX for each reduction ratio and frame size. The axial pitch is established by a method of manufacturing a worm shaft that has a thread that corresponds to the desired gear ratio. A gear is a rotating assembly of parts that are made up of teeth and a worm.
In addition to the axial pitch, a worm gear’s shaft can also be made from different materials. The material used for the gear’s worms is an important consideration in its selection. Worm gears are usually made of steel, which is stronger and corrosion-resistant than other materials. They also require lubrication and may have ground teeth to reduce friction. In addition, worm gears are often quieter than other gears.

Gear 22’s tooth parameters

A study of Gear 22’s tooth parameters revealed that the worm shaft’s deflection depends on various factors. The parameters of the worm gear were varied to account for the worm gear size, pressure angle, and size factor. In addition, the number of worm threads was changed. These parameters are varied based on the ISO/TS 14521 reference gear. This study validates the developed numerical calculation model using experimental results from Lutz and FEM calculations of worm gear shafts.
Using the results from the Lutz test, we can obtain the deflection of the worm shaft using the calculation method of ISO/TS 14521 and DIN 3996. The calculation of the bending diameter of a worm shaft according to the formulas given in AGMA 6022 and DIN 3996 show a good correlation with test results. However, the calculation of the worm shaft using the root diameter of the worm uses a different parameter to calculate the equivalent bending diameter.
The bending stiffness of a worm shaft is calculated through a finite element model (FEM). Using a FEM simulation, the deflection of a worm shaft can be calculated from its toothing parameters. The deflection can be considered for a complete gearbox system as stiffness of the worm toothing is considered. And finally, based on this study, a correction factor is developed.
For an ideal worm gear, the number of thread starts is proportional to the size of the worm. The worm’s diameter and toothing factor are calculated from Equation 9, which is a formula for the worm gear’s root inertia. The distance between the main axes and the worm shaft is determined by Equation 14.

Gear 22’s deflection

To study the effect of toothing parameters on the deflection of a worm shaft, we used a finite element method. The parameters considered are tooth height, pressure angle, size factor, and number of worm threads. Each of these parameters has a different influence on worm shaft bending. Table 1 shows the parameter variations for a reference gear (Gear 22) and a different toothing model. The worm gear size and number of threads determine the deflection of the worm shaft.
The calculation method of ISO/TS 14521 is based on the boundary conditions of the Lutz test setup. This method calculates the deflection of the worm shaft using the finite element method. The experimentally measured shafts were compared to the simulation results. The test results and the correction factor were compared to verify that the calculated deflection is comparable to the measured deflection.
The FEM analysis indicates the effect of tooth parameters on worm shaft bending. Gear 22’s deflection on Worm Shaft can be explained by the ratio of tooth force to mass. The ratio of worm tooth force to mass determines the torque. The ratio between the two parameters is the rotational speed. The ratio of worm gear tooth forces to worm shaft mass determines the deflection of worm gears. The deflection of a worm gear has an impact on worm shaft bending capacity, efficiency, and NVH. The continuous development of power density has been achieved through advancements in bronze materials, lubricants, and manufacturing quality.
The main axes of moment of inertia are indicated with the letters A-N. The three-dimensional graphs are identical for the seven-threaded and one-threaded worms. The diagrams also show the axial profiles of each gear. In addition, the main axes of moment of inertia are indicated by a white cross.

40-50HP China rhino bush hog pto shaft Tractor Rotary Tiller Rotary Cultivator Cultivator 1gqn-160 with ce certificate top quality low price

Leave a reply

We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

40-50HP China rhino bush hog pto shaft Tractor Rotary Tiller Rotary Cultivator Cultivator 1gqn-160 with ce certificate top quality low price

Made in China, Sold to the world
Versatile, Easy, Affordable, Powerful, Reliable
Distinguish Eurostar from other Chinese Brands.

1. About us
Shan EPT Euro Star Machinery Manufacture Co., Ltd.is one of the major suppliers and exporters of farm equipments and tractor implements in China, including various kind of tractor parts, implements and attachements.
EPT got the certificate of ISO9001: 2000 and most of our farm implements are CE approved for USA and Europe respectively, which have been recognized by all countries in the world. We have business with over 100 countries in the world. We will be glad to work with the new partners worldwide. We will continue to keep to our strategic target of superior quality, low cost and globalized farm equipment, and adopt a management approach characterized by higher standards, full precision and itemization, and zero defects, endeavor to offer the world-class brand products and will build one of the most competent industrial bases in the world for Chinese engineering machinery, farm equipment and large industrial equipments.

2. W EPT choose us?
EPT is the leading and professional supplier in China for various kinds of agricultural implements!
EPT has over than 15 years experience with agricultural machines!
EPT can supply the best price and professional service!
EPT has good reputation with all world customers!

3. Product description
1).CE approved rotary cultivator drive type:GEAR DRIVEN and 3 point linkage.

2).With 4 or 6 blades per flange, you get maximum soil mix for preparing planting beds, gardens, incorporating fertilizer, landscaping, or other jobs.

3).This Category 1 CE approved rotary cultivator includes a normal PTO shaft (But we have three PTO shaft can choose ,Normal PTO shaft ,shear bolts PTO shaft and Slip clutch PTO shaft ). Available in 4.5,and 6 ft models.

4).PTO speed is 540 RPM.

4. Technical parameters

Model	1GQN-85	1GQN-140	1GQN-150	1GQN-160	1GQN-180	1GQN-200	LGQN-220	1GQN-230
Working Width (mm)	850	1400	1500	1600	1899	2000	2200	2300
Working Depth (mm)	120				120-160
PTO Speed (r/min)	540
No. of Disc (pc)	24	30	36	42	48	54	60	66
Linkage	Three Point Mounted
Matched Power (hp)	12~20	30-40	30-45	40-50	50-80	55-85	70-90	90-120

5.Product pictures

6. Payment
If you would like to get an offer or place an order, Contact us with the products name, model, quantity desired or a description if not listed in our website. All of our prices are for dealership based on wholesale purchase. We offer various payment options such as Wire Transfer (T/T), Letter of Credit at sight, Paypal, Westunion etc.

7. Shipment
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and EPT service.

8. Contact us
Mr. Duke Zhang
Shan EPT Euro Star Machinery Manufacture Co., Ltd.
Add: West of Chang Ning Street ,Fang zi District,HangZhou City, ZheJiang , Province,P.R.C.
Tel: +86 186063 0571 00, +86~571-8822571/8822 0571 7 0571 277
Website:

9.Service

One-stop business chain service support system
With an EPT service team with rich experience and excellent skill, Eurostar is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.

1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Over 100 times annually
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified

2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.

3) Training Service
Characteristic Training Mode: invite the technicians of dealers to Eurostar for training, send Eurostar engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
Almost 100 people will attend the training in Eurostar factory every year;
One-to-one EPT assignment training;
Remote online network training;

4) Technical Support
The whole process Technology support covers on sale and after-sale service.
Nearly 50 categories of technical support materia EPT for 4 series products;
Various support methods like maintenance manual, wall chart, operation instruction disk and so on;
Multi-language materia EPT in Chinese, English, Russian, Portuguese, Spanish and Arabic respectively.

10.FAQ:
W EPT choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 12 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar’ s warm reception, trustwort EPT and efficient professional services and persistent care.

EUROSTAR CUSTOMERS ALL OVER THE WORLD

40-50HP China rhino bush hog pto shaft Tractor Rotary Tiller Rotary Cultivator Cultivator 1gqn-160 with ce certificate top quality low price